How to Refinish Hardwood Floors

5 Steps for hardwood floors refinishing

You should consider learning how to refinish hardwood floors, if you are interested in updating your home so that it exhibits its original beauty and flair.

Floors that are composed of hardwood require a lot of maintenance. It takes time and a lot of technique in order to ensure that they retain their shine and natural beauty overall. If you have found that your floor appears a bit dull and looks as if it is suffering from a lot of wear and tear, it may be time to engage in the hardwood floors refinishing. In this guide, you will be provided with the steps involved in how to refinish hardwood floors.

Step One:

The first step to hardwood floors refinishing is to ensure that everything is removed from the room that you will be working with. You should relocate all furnishings from the room to another location. Once you have performed this step, you will want to ensure that are types of carpet, rugs, and other floor accessories are moved from the room. It is important to get someone to assist you with this step as it could be quite a strain to do it alone.

Step Two:

Once everything is removed from the room, you will want to look around on all parts of the floor to determine if there are any physical obstructions. Examples include loose wood staples, screws, bolts, and nails. Seeing that when you learn how to refinish hardwood floors you must use sandpaper, it is important to ensure that any and all obstructions are removed from the floor or dealt with in such a way that they do not result in damage to the sandpaper or the sanding machine that you will be using on the floor.

Step Three:

Next, you should start running a sanding machine over the entire surface of the floor. It is important to utilize only heavy grit sandpaper. When using the machine, be certain that you sand the floor in the direction that the grain of the wood is going on the floor. If you go across the grain in an uneven manner, you may damage the flooring. Once finished with this step, you should clean up any and all debris caused by the sanding machine that you have been using.

Step Four:

When doing hardwood floors refinishing, it is important to pick out a stain that will be appropriate for the flooring. Once you have found the stain that you want to use, you should test a small section of the floor to ensure that you are happy with the final color. If so, you may continue brushing the stain on the floor. You should then permit the flooring to completely dry prior to moving on to the next step. This will assist in optimizing the color of the flooring and will reduce the opportunity for damage to occur.

Step Five:

Now, it is time to add the polyurethane finish mix. You may purchase this at any home improvement store. You should apply the finish in much the same way that you applied the stain. Once the entire floor is covered, you should allow it to completely dry. Once it is all dry, you may add a second coat to enhance the overall appeal of the room. That is all it takes when it comes to learning how to refinish hardwood floors.

Return from How to Refinish Hardwood Floors to Home Page

Return from How to Refinish Hardwood Floors to How to Giides